White Ink & Powder, Film Bundle

Features

White Ink & Powder, Film Bundle is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• This bundle covers the three consumables every DTF print run needs: white underbase ink, adhesive powder, and film to print on.
• High-grade Titanium Dioxide formula delivers maximum opacity in a single pass the foundation layer every transfer needs before CMYK colors go down.
• The Powder, Printium Premium DTF Powder 1 kg
• Double-sided anti-static matte coating built for roll-to-roll production.

Specifications

Instructions

1. Usage Instructions
2. Load White ink into your printer's white channel; shake thoroughly before each use
3. Load the film roll into your 60cm roll-to-roll DTF printer
4. Print the white underbase layer first, then CMYK design
5. Apply DTF powder evenly over the wet ink within 60 seconds
6. Shake off excess powder, cure until the powder melts and turns glossy
7. Press onto garment at 320°F for 15 seconds
8. Peel hot immediately (instant peel) or allow to cool first (cold peel)
9. Store all items sealed, in a cool/dry location away from humidity and direct sunlight

Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.