Epson I3200 Printhead Capping Station – Grid

Features

Epson I3200 Printhead Capping Station – Grid is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• The Epson i3200 Printhead Capping Station (Grid Model) is a vital component for the health of your digital printing system.
• The "Grid" internal architecture is not just for show.
• When the printer performs a suction cycle, the pump creates a vacuum inside the cap.
• This Grid Model Capping Station is manufactured to meet the rigorous demands of industrial garment decoration.
• The sealing rim is the most critical part of the cap.
• The drainage ports at the bottom of the Grid cap are molded with zero-tolerance precision.
• Dust is a major enemy of the i3200 printhead.
• Even the most advanced capping station requires regular care to protect your investment.

Specifications

Instructions

General handling guidance

1. Check the exact model, dimensions and connection or mounting requirements against your equipment before use.
2. Use the equipment manufacturer’s service manual for installation. Electrical, printhead and internal mechanical work should be carried out by a qualified technician.
3. Switch off and isolate the equipment from its power supply before servicing; allow hot components to cool.
4. Inspect the replacement part and preserve the original cable, tube and connector orientation. Do not force fittings or substitute an unverified electrical rating.
5. After installation, follow the equipment manual’s inspection and test procedure before returning the machine to production.