Features
Mug Heat Press Machine Sublimation for 11–15oz Mugs – MP180 is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.
- The interface is intuitive and easy to navigate during a busy production run.
- Not all mugs are created equal in diameter.
- Correct pressure is vital for the gas infusion process of sublimation.
- Safety is a top priority for any heat-based equipment.
- The machine’s frame is constructed from reinforced steel for maximum stability.
- The machine is also energy-efficient, drawing only the power it needs to maintain heat.
Specifications
| Product | Mug Heat Press Machine Sublimation for 11–15oz Mugs – MP180 |
|---|---|
| Brand | PRESSLY |
| SKU | PS-MP180MG-H |
| Model | Pressly MP180 Mug Press |
| Heat Press Style | Electric One-Touch |
| Compatible Mug Sizes | 10–16 oz (Straight Wall) |
| Mug Diameter Compatibility | 3.2–3.4 inches (82–86 mm) |
| Controller | Smart Controller (No Display Screen) |
| Max. Temperature | 356°F (180°C) |
| Voltage | 110V or 220V |
| Power | 300W |
| Pressing Time | Approx. 4 minutes |
| Auto Shut-Off | After 10 minutes of inactivity |
| Product Dimensions | 8.3 x 13.2 x 8.9 inches |
| Product Weight | 12.1 lbs (5.5 kg) |
| Packaging Dimensions | 14.2 x 8.7 x 10.2 inches |
| Package Weight | 13.2 lbs (6.0 kg) |
| Certifications | CE, EMC, LVD, RoHS |
| Specification detail 18 | Compatible Mug Requirements: |
| – Straight wall only | 10–16 oz (330–470 ml) |
| – Diameter | 3.2–3.4 inches (82–86 mm ± 1 mm) |
Instructions
- Read the Instruction Guide: Carefully read and understand the included instruction manual before operating the machine for safety and optimal performance.
- Power On and Preheat: Plug in the mug press and turn it on. The machine will automatically begin preheating to the first stage temperature of 80°C (176°F). Wait until the “Ready” indicator light turns on.
- Insert the Mug: Hold your polymer-coated sublimation mug by the handle and place it carefully into the mug press. Note: Butcher paper is not required when using sublimation transfer sheets with this machine.
- Start the Pressing Process: Press the forward button to begin the transfer. The motor will engage and apply pressure. Once the mug is secured, the countdown timer begins automatically. Four indicator lights on the exterior represent each minute of the process.
- Remove the Mug: Once the press cycle completes, raise the lever to release the mug. Use the handle to remove the mug safely. Caution: The mug will be hot. You may use heat-resistant gloves for added safety. Let the mug cool for several minutes before handling further.
- Compatible Mug Requirements:
- Use only sublimation-compatible, polymer-coated mugs
- Straight wall only: 10–16 oz (330–470 ml)
- Diameter: 3.2–3.4 inches (82–86 mm ± 1 mm)
Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.
Reviews
There are no reviews yet.