Fiber Optic Patch Cable SC/UPC 2×13.1′

Features

Fiber Optic Patch Cable SC/UPC 2×13.1' is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• In today’s data-driven world, the speed of your network determines the success of your operations.
• Fiber optics represent the gold standard of modern communication.
• Upgrading to fiber optics is more than just a speed boost.
• In a workshop filled with motors and high-voltage equipment, electromagnetic interference (EMI) is a major problem.
• The "SC/UPC" designation refers to the specific type of connector and its polished finish.
• UPC (Ultra Physical Contact): This refers to the way the glass fiber end is polished.

Specifications

Instructions

1. Fiber optic cables are powerful but delicate. To maintain their performance, you must handle them with care.
2. Never Bend Too Sharply: Glass fibers have a "minimum bend radius." If you bend the cable too tightly, the glass inside can develop micro-cracks. This will cause the light to leak out and the signal to fail.
3. Keep the Ends Clean: Even a tiny speck of dust on the connector tip can block the light signal. Always keep the protective dust caps on when the cable is not in use. Use a specialized fiber cleaning pen before every insertion.
4. Avoid Pulling by the Jacket: When unplugging the cable, always pull by the connector housing. Never pull on the cable itself, as this can strain the internal fiber-to-connector bond.
5. Label Your Lines: In a duplex setup, it is easy to swap the "Transmit" and "Receive" lines. Use the colored boots (typically blue for SC) to ensure you are connecting the right lines to the right ports.

Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.