Epson I3200 Printhead Capping Station – Butterfly

Features

Epson I3200 Printhead Capping Station – Butterfly is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• Designed specifically for the i3200 series, the Butterfly design features a unique internal structure.
• The capping station is often called the "parking lot" of the printer.
• DTF inks are water-based and contain binders that dry quickly when exposed to air.
• This Epson i3200 Capping Station stands out due to its material quality and precision molding.
• The "Butterfly" seal is made from a high-grade, flexible polymer.
• Inside the Butterfly cap is a microscopic stainless steel or polymer mesh.
• The Butterfly capping station is designed to work with your printer’s lifting mechanism.
• Even the best capping station requires regular care to protect your printhead.

Specifications

Instructions

1. Even the best capping station requires regular care to protect your printhead.
2. The "Water Test": Occasionally, pour a small amount of cleaning fluid into the cap while the printer is off. If the fluid drains away immediately, your lines are clear. If it sits there, you have a blockage in the waste tubes.
3. Replace Regularly: Capping stations are consumables. The rubber eventually loses its elasticity. For high-volume shops, we recommend replacing the capping station every 3 to 6 months to avoid expensive printhead failures.
4. Clean the Wiper Blade: The capping station works in tandem with the wiper blade. If the wiper is dirty, it will transfer gunk to the capping station. Clean both simultaneously.

Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.