Cardboard Shredder Machine – Corrugated Box Expanding Mesh Cutting Machine for Cushion Filling

Features

Cardboard Shredder Machine – Corrugated Box Expanding Mesh Cutting Machine for Cushion Filling is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• Ideal for e-commerce stores, warehouses, print shops, and fulfillment centers, this packaging machine helps streamline operations while reducing reliance on plastic bubble wrap and foam.

Specifications

Instructions

1. Setup
2. Place the machine on a stable, flat surface in a dry, well-ventilated area.
3. Ensure the power switch is in the OFF position before connecting.
4. Plug the machine into a 110V standard outlet.
5. Preparing Material
6. Use clean, dry corrugated cardboard (3–5 layers).
7. Remove staples, tape, labels, or any hard objects to prevent damage.
8. Cut oversized cardboard to fit within the machine’s maximum feed width.
9. Operation
10. Turn the power switch to position 1 or 2.
11. Slowly insert the cardboard into the feed opening.
12. Allow the machine to automatically pull in and process the material.
13. As the cardboard exits, gently stretch it to expand into a honeycomb mesh structure.
14. Using the Output
15. Wrap fragile items directly with the expanded mesh.
16. No tape or additional fillers are required in most cases.
17. Safety Guidelines
18. Keep hands, fingers, loose clothing, and jewelry away from the feed opening.
19. Do not insert materials other than corrugated cardboard.
20. Do not exceed the maximum thickness ( 0.24 inches / 6 mm).
21. Always turn off and unplug the machine before cleaning or maintenance.
22. Keep out of reach of children.
23. Maintenance
24. Regularly remove dust and debris from the feed area.
25. Do not use water or liquid cleaners directly on the machine.
26. Periodically check for any worn or damaged parts.
27. If the machine jams, turn off power immediately and carefully clear the blockage.

Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.