High Temperature Cloth with Metal and Springs

Features

High Temperature Cloth with Metal and Springs is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• The core of this product is made from high-density fiberglass or ceramic-based fibers.
• The "Metal and Springs" aspect of this product is what sets it apart from basic insulation.
• Beyond DTF, this cloth is ideal for vacuum heat presses and large-format laminators.
• Installation is straightforward thanks to the integrated spring-loading system.
• The material is also non-conductive, meaning it will not cause electrical shorts if it touches a terminal.
• A well-insulated machine also produces less ambient noise.
• Don't let your profits escape through heat leaks.

Specifications

Instructions

General handling guidance

1. Check the exact model, dimensions and connection or mounting requirements against your equipment before use.
2. Use the equipment manufacturer’s service manual for installation. Electrical, printhead and internal mechanical work should be carried out by a qualified technician.
3. Switch off and isolate the equipment from its power supply before servicing; allow hot components to cool.
4. Inspect the replacement part and preserve the original cable, tube and connector orientation. Do not force fittings or substitute an unverified electrical rating.
5. After installation, follow the equipment manual’s inspection and test procedure before returning the machine to production.