Features
DTF Powder – Medium 1 kg (2.2 lb) is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.
- The effectiveness of a transfer depends on how well the powder melts and bonds.
- This powder penetrates the fabric weave without "bleeding" through to the other side.
- A common complaint with low-quality heat transfers is the "stiff" or "rubbery" sensation.
- This flexibility is essential for modern apparel, especially activewear and performance blends.
- Managing powder in a busy shop can be messy.
- Durability is the hallmark of a professional printing business.
- This powder is not limited to a single fabric type.
Specifications
| Product | DTF Powder – Medium 1 kg (2.2 lb) |
|---|---|
| Brand | PRINTIUM |
| SKU | PR-DPOW-003M |
| Size | 1 kg (approximately 2.2 lbs) |
| Micron Size | 120-200 microns |
| Type | Premium DTF Transfer Powder |
| Melting Range | 240°-280°F (115°-140°C) |
| Pressing Range | 260–320°F with medium pressure (25–38 psi) |
| Color | White |
| Compatibility | Works with all DTF inks and films |
Instructions
- Print Your Design: Load the DTF film into your printer and print your design using high-quality DTF inks.
- Apply Powder: Once your design is printed, evenly sprinkle the Premium DTF Powder over the design. Use a shaker to ensure an even coat, then shake off any excess powder.
- Cure the Design: Place the printed film in a DTF dryer to cure the ink and powder. This helps ensure proper bonding between the ink and the fabric.
- Heat Press: Position the printed film on your garment and apply heat and pressure according to the film's instructions, adjusting time and temperature based on the fabric type for best results.
- Peel and Finish: After heat pressing, peel the film (either hot, warm or cold, based on your preference), and allow the garment to cool down. Your design is now ready to wear!
- Storage: Store any unused powder in its original sealed packaging. Keep it in a cool, dry place to prevent moisture from affecting its performance.
- Handling Care: Be careful when handling the powder to avoid spills or contamination. Always use clean, dry tools to apply the powder.
- Avoid Clumping: Make sure the powder is stored in a dry area to prevent clumping or hardening over time.
Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.
Reviews
There are no reviews yet.