P50H – Smoke Extract Filter Purifier for DTF Powder Shaker Dryer

Features

P50H – Smoke Extract Filter Purifier for DTF Powder Shaker Dryer is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• Multi-Stage Filtration: Includes a pre-filter, high-efficiency main filter, and an activated carbon layer.
• DTF Optimized: Specifically handles glycerin-based fumes from PET films and TPU powders.
• Enhanced Separation: Superior oil and smoke separation compared to basic extractors.
• Digital Control Display: An intuitive interface for easy monitoring and adjustments.
• Adjustable Airflow: Easily control suction power to match your specific production needs.

Specifications

Instructions

1. Setup
2. Position the Printium P50H near your DTF powder shaker or dryer.
   – Connect the extraction hose securely to the equipment outlet.
   – Confirm all filters are properly installed.
   – Plug into a compatible power source.
3. Operation
4. Power on the unit using the control panel.
   – Adjust airflow based on smoke intensity.
   – Monitor operation via the digital display.
   – Keep airflow unobstructed during use.
5. Maintenance
6. Drain oil: Every 3 days from the drain port.
   – Replace activated carbon filter: Every 3 months.
   – Replace main filter: Every 6 months or as needed.
   – Check filters regularly for buildup or reduced efficiency.
7. Safety Notice
8. Always operate in a well-ventilated area.
   – Use appropriate protective equipment (PPE) when working with DTF materials.
   – Never run the machine without filters installed.
   – Avoid blocking air intake or exhaust outlets.

Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.