Features
Epson I3200-A1 Water-based DTF Printhead is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.
- One of the standout features is its ability to spray different sizes of ink droplets.
- Cost Efficiency: While the initial cost is higher than entry-level heads, its durability and ink efficiency result in a lower "cost per print" over time.
Specifications
| Product | Epson I3200-A1 Water-based DTF Printhead |
|---|---|
| Brand | EPSON |
| SKU | SP-P604D-001 |
| Technology | PrecisionCore Micro TFP (Thin Film Piezo) |
| Number of Nozzles | 3,200 total (8 rows × 400 nozzles per row) |
| Nozzle Resolution | 600 dpi per channel |
| Ink Compatibility | Water-based pigment DTF inks |
| Firing Frequency | Up to 43 kHz |
| Native Drop Size | 6 pl (variable droplet size supported) |
| Channels | 4 channels |
| Ink Firing Technology | Precision-controlled variable dot |
| Connector Type | 4-cable data (14 pin) |
| Usage | Designed for DTF printers using Epson I3200 architecture |
| Specification detail 13 | Product Integrity & Quality |
| Specification detail 14 | Unique product number |
| Specification detail 15 | Production code |
| Specification detail 16 | Serial number on each packaging |
| Specification detail 17 | ⚠️ Epson I3200-A1 DTF Printhead — Important Information & Final Sale Policy ⚠️ |
| Specification detail 18 | If You Believe the Item Arrived Damaged or Defective |
| Specification detail 19 | To submit a defect claim, the customer must: |
| Specification detail 20 | 1. Do NOT open or install the printhead |
| Specification detail 21 | 2. Keep the vacuum-sealed pouch intact |
| Specification detail 22 | 3. Provide clear photo/video evidence of the sealed packaging. Also an unedited unpackaging video of the product clearly showing the damage |
| Specification detail 23 | Installation Requirement |
| Specification detail 24 | Installation of this printhead is strongly recommended to be performed by a certified DTF machine technician. |
| Specification detail 25 | Incorrect installation, wiring, or cable connection can permanently damage the printhead’s internal circuitry. |
| Specification detail 26 | Damage caused by improper installation is not considered a defect and is not eligible for return or replacement. |
| Specification detail 27 | Installed or Used Printheads Are Not Eligible |
| Specification detail 28 | Once the printhead is opened, installed, or ink passes through it: |
| Specification detail 29 | Policy Agreement |
| Specification detail 30 | By purchasing this product, the customer acknowledges and agrees that: |
Instructions
- To protect your investment and ensure the longevity of your Epson I3200-A1 Water-based DTF Printhead, proper maintenance is non-negotiable:
- Daily Wet Caps: Never let the head sit dry. Use high-quality capping stations to keep the nozzle plate moist.
- Use Filtered Ink: Always use premium DTF inks. Low-quality pigments contain large particles that can permanently block the micro-nozzles.
- Temperature Control: Keep your workspace between 20°C and 28°C. Extreme heat can change ink viscosity and cause the head to misfire.
- Regular Cleaning: Perform automated head cleanings at the end of every shift to prevent ink from curing on the surface.
- Epson I3200-A1 Water-based DTF Printhead
Use these product-specific notes together with the supplied equipment manual and product label. Confirm compatibility and perform a small test before production.
Reviews
There are no reviews yet.