Press Roller

Features

Press Roller is available from YOUVSKEY. Review its features, technical details and handling guidance below to check suitability for your application.

• The most common cause of wasted material in roll-to-roll printing is media slippage.
• Over time, rollers can accumulate dust or ink residue, which reduces their effectiveness.
• UV inks and cleaning solutions can be harsh on standard rubber components.
• A faulty or dirty Press Roller can cause the film to buckle or "tunnel." When the film rises off the platen, it can strike the bottom of the expensive printhead.
• Additionally, our rollers are designed to leave no marks or indentations on the film.
• In high-speed modes, the demands on the feeding system increase significantly.
• The Press Roller is a silent hero in the UV DTF printing process.

Specifications

Instructions

General handling guidance

1. Check the exact model, dimensions and connection or mounting requirements against your equipment before use.
2. Use the equipment manufacturer’s service manual for installation. Electrical, printhead and internal mechanical work should be carried out by a qualified technician.
3. Switch off and isolate the equipment from its power supply before servicing; allow hot components to cool.
4. Inspect the replacement part and preserve the original cable, tube and connector orientation. Do not force fittings or substitute an unverified electrical rating.
5. After installation, follow the equipment manual’s inspection and test procedure before returning the machine to production.